About Oxygen Analyser

THE TECHNOVATION MODEL SP-5CZ OXYGEN ANALYZER is ZERO and CAL potentiometers provided

Confidence flash provided

Quick and accurate response to Oxygen

Programmable Alarms configuration, Both alarmshigh OR one high and one low. Settable throughout the range

Recorder output 0 - 1 V and 4 - 20mA

APPLICATIONS

MODEL SP-5 CZ is specifically designed for use in Oxygen /Nitrogen plants where the vented gases are mainly Nitrogen / Oxygen. Monitoringthe vent gases could tell when the % oxygen in nitrogen stream or vice versahas reached an abnormally high or low % necessitating corrective action withinthe plants operational parameters so as to reduce the wasted gas and increaseoutput. A single percent of oxygen reduced in the vent gases would increase theproduction by the equivalent amount leading to a one percent improvement in theplants production

STANDARD SPECIFICATIONS

Display : LED 12 mm high, with 3 digit

Range : 0 to 25 % OR 0-100% O₂

Resolution : 0.1 %steps

Accuracy : 2 %FSD at constant temp & pressure

Power Supply : 220 VAC, 50Hz, 1 Phase.

Sensor type :Electrochemical

Sensor mounting : At end of cable of 1.5 Mts.

Working temp : 0 to 45 ^OC

Calibration : By ambient air or certified calibration gas

Size : 98x 98 x 100 mm depth

Weight : 1 Kg.Approx.

Sensor life in AIR : 24 monthsExpected

Alarms : Twoaudible & visible.

Alarm relay : One setNO, C, NC contact of 50 VA rating provided per alarm.

Panel cutout size : 90 x 90 mm

Analog Output : 0-1 V and4-20 mA.

Flow : 0.1 0.2 LPM

Precise Oxygen Monitoring for Industrial Applications

The SR SP5 CZ Oxygen Online Analyser ensures reliable, real-time measurement of oxygen levels in industrial gases. With its advanced electrochemical sensor and automated control mode, it delivers precise readings crucial for safety and process optimization. Its robust design withstands challenging environments, from 0-95% humidity and -10C to 60C temperatures, making it suitable for a wide range of industries.


Advanced Features and User-Friendly Operation

Equipped with a digital display and multiple interface options, such as RS485 and 4-20 mA, the SR SP5 CZ simplifies monitoring and data integration. The analyser supports easy installation via panel mounting, and the calibration interval of every six months reduces maintenance requirements. Real-time alarm outputs offer immediate notification for safe operation and rapid response.


Durability and High Performance for Continuous Use

Housed in IP65 ABS plastic, the analyser is engineered for durability and long-term function. Its compact dimensions (98*98*100 cm) and lightweight design (1 kg) facilitate seamless implementation. The measurement range covers 0-25% O with fine resolution (0.01%), supporting a diverse range of industrial applications where accurate oxygen analysis is indispensable.